Detail Mitech Ultrasonic Flaw Detector Mfd800c
Mitech Ultrasonic Flaw Detector Mfd800c, 021-36000660 HP. 081215608000
The MFD800C is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspection requirements. It combines powerful flaw detection and measurement capabilities, extensive data storage, and the ability to transfer detailed inspection data to the PC via its high-speed USB port.
The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise in high gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.
The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in peralatanteknik.com welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.
Specification
Range: 0 to 9999 mm, at steel velocity
Material Velocity: 1000 to 9999m/ s
Display Delay: -20 to 3400 µ S
Probe Delay/ Zero Offset: 0 to 99.99µ S
Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
Test Modes: Pulse echo, Telp 021-60799777 Hp. 081215608000 dual element and thru-transmission
Pulser: Tunable Square Wave Pulser
Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
Pulse Energy: 200V, 300V, 400V, 500V, 600V selectable
Bandwidth ( amplifier bandpass ) : 0.5 to 15 MHz
Gate Monitors: Two independent gates controllable over entire sweep range
Rectification: Positive half wave, negative half wave, full wave, RF
System Linearity: Horizontal: + / -0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy + / -1 dB.Telp 021-60799777 Hp. 081215608000
Reject ( suppression) : 0 to 80% full screen height
Units: Inch or millimeter
Transducer Connections: BNC or LEMO
Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
Operating Temperature: -30 C to 50C
Storage Temperature: -30 C to 50C
Range
Up to 9999 mm in steel; Range selectable in fixed steps or continuously variable. Suitable for use on large work pieces and in high-resolution Telp 021-60799777 Hp. 081215608000 measurements.
Pulser
Pulse Energy selectable among 200V, 300V, 400V, 500V and 600V...
Pulse Width tunable from 0.1µ S to 0.5 µ S to match the probes with different frequency.
Pulse Repetition Frequency adjustable from 10 Hz to 1 kHz in 1 Hz Telp 021-60799777 Hp. 081215608000 increments.
Damping selectable among 68© 100© 150© And 500© For optimum probe performance
Test Modes include Pulse echo, dual and thru-transmission
Receiver
Sampling: 10 digit AD Converter at the sampling speed of 160 MHz
Rectification: Positive Halfwave, Negative Halfwave, Fullwave and RF
Analog Bandwidth: Telp 021-60799777 Hp. 081215608000 0.5MHz to 15MHz capability with selectable frequency ranges ( automatically set by the instrument) to match probe for optimum performance.
Gain: 0 dB to 110 dB adjustable in selectable steps 0.1 dB, 2 dB, 6 dB, and locked.
Gates
Two fully independent gates offer a range of measurement options for signal height or distance using peak triggering.
The echo-to-echo mode allows accurate gate positioning for signals which are extremely close together.
Gate Start: Variable over entire displayed range
Gate Width: Telp 021-60799777 Hp. 081215608000 Variable from Gate Start to end of displayed range
Gate Height: Variable from 0 to 99% Full Screen Height
Alarms: Threshold positive/ negative
Memory
Memory of 1000 channel files to store calibration set-UPS
Memory of 10000 wave files to store A-Scan patterns and instrument settings.
All the files can be stored, recalled and cleared.
Video Recorder
Screen scenes can be captured as movie files. More than 10 hours movie can be saved to the inside memory. They can be re-played using the instrument or the PC software delivered with the instrument.
Video Recorder is useful in many situations, it is very convenient for those who want to analyze the probing activities later.
PERALATAN TEKNIK
Telp. + 62-021-36000-660 Fax. + 62-021-36000-661
cdma: 021-60799777 Hp. 081215608000
Email: alatteknik@ hotmail.com
Site: PeralatanTeknik.com
Supplier Mitech Instrument, Distributor Mitech Indonesia, Mitech Instrument Indonesia
Mitech MH310 Portable Hardnes Tester, Mitech MH320 Portable Hardnes Tester , Mitech HL200 Portable Hardnes Tester , Mitech MH210 Portable Hardnes Tester , Mitech MT150 Ultrasonic Thickness Gauge, Mitech MT160 Ultrasonic Thickness Gauge, Mitech MT200 Ultrasonic Thickness Gauge, Mitech MCT200 Coating Thickness Gauge
Mitech MFD350B Ultrasonic Flaw Detector, Mitech MFD500B Ultrasonic Flaw Detector, Mitech MFD620C Ultrasonic Flaw Detector, Mitech MFD650C Ultrasonic Flaw Detector, Mitech MFD800C Ultrasonic Flaw Detector
Mitech Instrument D impact device, Mitech Instrument G impact device, Mitech Instrument DL impact device, Mitech Instrument C impact device, Mitech Instrument D+ 15 impact device, Mitech Instrument DC impact device, Mitech Instrument E impact device, Mitech Instrument D impact body, Mitech Instrument G impact body, Mitech Instrument DL impact body, Mitech Instrument C impact body, Mitech Instrument D+ 15 impact body, Mitech Instrument DC impact body, Mitech Instrument D impact ball, Mitech Instrument G impact ball, Mitech Instrument DL impact ball , Mitech Instrument C impact ball D+ 15. Supplier Mitech Instrument, Distributor Mitech Indonesia, Mitech Instrument Indonesia, Mitech World.
Telp. 021-36000660 Hp. 081215608000
PERALATANTEKNIK.COM
Tampilkan Lebih Banyak